Technical Knowledge Center

How Much Foam Concrete Can 1 Ton of Foaming Agent Produce? A Dwellfoam Calculation Guide

The volume of foam concrete produced from 1 ton of foaming agent depends on target density, dilution ratio, and foam dosage. At 300 kg/m³ density and 1:30 dilution, 1 ton of foaming agent can produce roughly 80–120 m³ of foam concrete. Dwellfoam provides reference tables and a calculation method for different density grades to help with project material planning.

Which Foaming Agent Should You Use for Foam Concrete? A Guide for Cement and Magnesia Systems

Choosing a foaming agent for foam concrete starts with the base material—cement or magnesia—then the target density and site conditions. For cement systems, prioritize protein-based or synthetic agents with good foam stability and low bleeding; for magnesia systems, choose alkali-resistant agents compatible with magnesia slurry. This guide covers selection criteria and common mistakes for both systems.

100 Barrels of Foaming Agent Shipped to Hong Kong

Dwellfoam delivered 100 barrels of high-stability foaming agent to a customer in Hong Kong for lightweight concrete production. The order was completed within 7 working days from confirmation to loading, with batch testing confirming foaming ratio and foam stability.

🌍 Foamed Concrete vs Stone Columns

Two Different Ground Improvement Engineering Approaches

Foam Concrete Bathroom Backfill: Common Problems and Solutions

Foam Concrete Bathroom Backfill Construction Guide

Lightweight, Monolithic, Non-Settling Sunken Slab Backfill Solution